Just like building a house, you need to use apparel fusible interlining fabric reinforced cement as the skeleton; to make clothing, you need to use interlining as the skeleton. Only through the styling, reinforcement, and shape-preserving effects of interlining cloth can the clothing form various beautiful styles.Clothing interlining is a large type of clothing accessories, which acts as a skeleton on the clothing. Just like building a house, you need to use reinforced cement as the skeleton; to make clothing, you need to use interlining as the skeleton.
Only through the styling, reinforcement, and shape-preserving effects of interlining cloth can the clothing form various beautiful styles. To put it simply, it is actually the outer fabric, the inner lining, and the interlining cloth in the middle, so in general, the interlining cloth cannot be seen directly, but it needs to form a stiff, full feel, smooth transition and reinforcement The location is covered with interlining. Woven resin black carbon interlining, woven resin interlining, woven (including knitted) hot melt adhesive interlining and non-woven hot melt adhesive interlining are the four major series of modern interlining.
In addition, there are many other interlining fabrics and ancillary products, such as tie interlining, linen interlining, waist interlining and waist lining lining, mother-in-law belt, pocket, shoe and hat interlining, etc. The parts used for interlining are: Sheets, inner welts, collars, lapels, back sheets, pockets, flaps, belts, collars, plackets, cuffs, welts, sleeves, stops, hem cuffs, cuff forks, etc. Combine temperature, pressing time and pressure. There are certain connections when the three elements interact within a certain range. As the temperature increases and the pressure increases, the pressing time can be relatively shortened, and vice versa.
If the temperature is too high and the pressing time is too long, it is easy to damage the performance and color of the fabric, and it is also easy to produce glue. If the pressure is too high, it is easy to damage the appearance of the fabric especially light fabric. Before mass production, the bonding conditions must be tested repeatedly to determine the best process conditions. If the glue is evenly distributed on the lining cloth and the fabric, it means that the bonding conditions are appropriate, otherwise it should be tested again. After bonding, the cloth surface should be smooth, without wrinkles, bubbles, and glue. After bonding, perform peeling strength, dry cleaning, Washing performance test, the test result must meet the production requirements. The bonding effect must meet the style and characteristic requirements of the clothing.
